PRODUCTS
NanoBiz Korea
- > Extra large chamber capable of drying very large or numerous smaller samples.
- > Excellent choice for active facility enhancing process CPD capability.
- > Chamber Inserts* reduces chamber ID to 3", 2" or 1.25" I.D. maximizing LCO2 consumption efficiency and process time.
- > Vernier handles on all metering valves allow for reproducible settings.
- > Indicator control LED's panel effectively indicate run status.
- > Internal filtration* protect samples and valves down to 0.5µm.
- > EZ top loading process chamber.
- > Under-lit chamber with viewing port aids visualization of chamber status.
- > Internal surfaces inert to LCO2 and ultra-pure alcohols.
- > Advanced solid state reliable electronics.
- > Microprocessor* controller for repeatable operating parameters insuring reproducibility of results via Automatic process.
- > Integrated temperature control.
- > Fast adiabatic chamber cooling* with CO2.
- > Static pressure control module for automatic pressure stability.
- > Tough, solvent resistant cabinet.
- > SOTER™ Condenser* is included with system to capture waste alcohol and deaden PURGE exhaust noise.
- > All electronic and other components meet UL, CE and/or U.S. Military Specifications.
Specifications
- > Cabinet: 14.25"(W)x 11.75"(H) x 25.0"(L) [36.2cm(W) x 29.8cm(H) x 63.5cm (L)]
- > System Set-Up Area Required: 42"(W) x 30"(D) [107cm(W) x 76cm(D)]
- > Chamber size: 4.5" I.D. x 1.25" Depth
- > Temperature gauge range: -30°C to 60°C, Pressure gauge range: 0 to 2,000 psi.
- > 120V / 50-60Hz (Other voltage units also available: Please inquire)
Standard Accessories
- > 3 Teflon® chamber inserts. Enables chamber ID to reduce to 3", 2" or 1.25" I.D.
- > SOTER™ Condenser captures all alcohol and deadens exhaust noise.*
- > Flexible High-Pressure braided stainless steel inert Teflon® lined LCO2 Supply Hose, 10ft (approximate 3.0m) long.
- > LCO2 Filter Assembly (#8784) removes water/oil and particulates down to 0.5µm. Filter is conveniently pre-> installed onto the LCO2 High Pressure Hose.
- > Static free exhaust tubing for the PURGE/VENT/BLEED and COOL exhaust outlets.
- > Flow Meter supplied allows precise periodic BLEED exhaust rate flow control.
- > Spare chamber O-ring (2), chamber lamp (1), and 5A slo-blow fuses (2).
- > User Manual and Check-Out data sheet.
- > Free lifetime technical support.
- > 2 year warranty on all parts and labor.
Optional Accessories
- > 8760-02: :KNURL NUT for 4" and 6" Process Chamber
- > 8760-40: :5 AMP FUSE for SAMDRI® Models: PVT-3D, 795, 815, 815B, 915B (Series A & Series B Only)
- > 8770-10: :CHAMBER LAMP, 120Volt/60Hz
- > 8770-32: :HIGH-PRESSURE HOSE, 5ft
- > 8770-33: :HIGH-PRESSURE HOSE, 10ft
- > 8770-60: :CHAMBER LID for 4" Process Chamber
- > 8784: :LCO2 Filter Assembly
- > 8784A: :LCO2 FILTER ELEMENT for #8784
- > 8770-83B: :0.5µm Stainless Steel Particulate Filter Element for LCO2 T-Filter or External Purge Line Filter.
- > 8784B: :O-Ring for # 8784 LCO2 Filter Assembly Seal
- > 8784-05: :Gasket for LCO2 Tank Connect
- > 8770-51T/815B: :O-Ring for Autosamdri®-934 and Autosamdri®-815B
- > 8770-46: :Flow Meter - Use with any 2.5", 3.4" and 4.0" dia. Autosamdri® Chamber (60 SCFH)
- > 8770-53: :POWER CABLE
- > 8770-54: :LCO2 TANK SCALE W/ REMOTE DISPLAY
- > 8770-56A: :Step-Down Transformer, 200-240V → 110-120V, 3000W
- > 8770-83A: :Internal 0.5µm 316SS Particulate Line Filter
- > 8761: :GRID HOLDER, Holds 12 grids
- > 8762: :SAMPLE HOLDER, FOR 12 SAMPLES
- > 8763: :SAMPLE HOLDER, FOR 24 SAMPLES
- > 8764: :SAMPLE HOLDER, FOR 4 SAMPLES
- > 8766: :COVER SLIP HOLDER, for 9mm to 13mm Diameter Glass Cover Slips
- > 8766-01: :SPARE WASHERS FOR COVER SLIP HOLDER, for use with #8766
- > 8766-02: :STAINLESS STEEL SCREENS FOR COVER SLIP HOLDER, for use with #8766
- > 8767: :COVER SLIP HOLDER, for 16mm to 22mm Diameter Glass Cover Slips
- > 8767-01: :SPARE WASHERS FOR COVER SLIP HOLDER, for use with #8767
- > 8767-02: :STAINLESS STEEL SCREENS FOR COVER SLIP HOLDER, for use with #8767
Tousimis CPD : Critical Point Dryer
Can be drying a sample without damage through the patented stasis mode.
