PRODUCTS
NanoBiz Korea
나노비즈코리아
Mel-Build
In-situ Nano Order Tensile Holder
Nano-Order Tensile : min.step 1nm
Prepare 2 type holder of Polymer and Material model
Cartridge strcture: Easy link to Microtome and FIB
Prepare 2 type holder of Polymer and Material model
Cartridge strcture: Easy link to Microtome and FIB
제품설명
In-situ Nano Order Tensile Holder
Nano-Order Tensile : min.step 1nm
Prepare 2 type holder of Polymer and Material model
Cartridge strcture: Easy link to Microtome and FIB
Polymer and materila Nano order Tensil data Collection
Cu-6Sn HR 5nm Tensile
Prof. M. Murayama (Virginia Tech)
Microscopy, 67, 296-300 (2018).
Prof. Jinnai Tohoku University
As shown in the video above, it is possible to perform a tensile test by dynamic observation.
Cartridge Strcture
Polymer Model
Co-dveloper Prof.Hiroshi Jinnai Tohoku University
Sample Preparation Method Example
Placing the cut section of the microtome on the cartridge.
Set the sample on the cartridge in various ways.
The cartridge design can be changed depending
on the sample set method.
Then, the cartridge on which the sample is placed set
on the tem holder, and the cartridge is tensile by deforming.
TEM holder specification
| Material Model | |
|---|---|
| Tensil resolution: | 1nm/step 3nm/dec |
| Tensile Distance: | 200μm |
| TIlt Angle: | Thermo Fisher ±65° JEOLHR PP ±60°/ UHR PP ±10° |
| Cartridge Model: | Prepare FIB and Bulk sample |
| Soft Material Model | |
| Tensil resolution: | 1nm/step 3nm/dec |
| Tensile Distance: | JEOL Model 800% Thermo Fisher 200% |
| TIlt Angle: | JEOLHR PP ±20°/ UHR PP ±10° Thermo Fisher ±20° |
| Cyclic Straining Mode: | JEOL Avilable Thermo Fisher Not Function |
| Cartridge Model: | Prepare Microtome and FIB |
