PRODUCTS
NanoBiz Korea
나노비즈코리아
VPI Coater
Ion Sputtering Coater (SD900 Model)
SD900 모델은 실험실 SEM 샘플 준비에 이상적이며 설계되었습니다. 더 나은 이미징을 위해 비전도성 SEM 샘플을 Au로 코팅하는 데 널리 사용됩니다. 표면 처리에도 탁월합니다. 적절한 진공 펌프를 사용하면 2분 이내에 작업 진공 압력에 빠르게 도달할 수 있습니다. 훨씬 적은 열을 발생시킵니다. 사용자 친화적이고 조작하기 쉽습니다.
제품설명
Ion Sputtering Coater (SD900 Model)
Introduction
Ion Sputtering Coater (SD900 Model) is ideal and designed for lab SEM sample preparation.
It is widely used to coat non-conductive SEM samples with Au for better imaging. It is also excellent for surface treatment.
Working vacuum pressure can be achieved quickly within 2 minutes when using proper vacuum pump. It generates much less heat. It is user friendly and easy to operate.
Vacuum pump is included.
Technical Specification
| Vacuum pump set | (Oil required) rotary vacuum pump |
| Rotary pumping speed | 50 Hz : 8 m³/h (2.2 L/s)/ 60 Hz : 9.6m³/h (2.6 L/s) |
| Vacuum limit | 2Pa |
| Max sputtering current | 0-20mA |
| Working pressure | 30Pa -7 Pa |
| Vacuuming time | <5 Min(2 Pa) |
| Vacuum measure | Measuring range from atmosphere to 2*10-2mbar |
| Gas control | Gas flow controller |
| Chamber size | Φ150*120mm (height) scratch resistant quartz glass |
| Magnetron target source | Target size φ 50*0.1mm(Au)/ target source: Au,Ag,Pt |
| Operation method | Instruction Manual |
| Weight/size | 45kg/360mm length x 300mm wide x 380mm high |
| Power supply | AC 110V 60Hz or AC 220V 50Hz |
| Power consumption | <1500W |
| Cooling method | Air cooling |
| Warranty | One year limited warranty with lifetime product support |
