나노비즈코리아

본문 바로가기 주메뉴 바로가기 서브메뉴 바로가기

PRODUCTS

NanoBiz Korea

Insight Chips

Insight Chips
Manufactures full liquid-cell systems for TEM, SEM and optical microscopy, entirely compatible & retrofittable with your current microscopes.

제품설명

THE NANO CHANNEL CHIP

We produce the Nano Channel Chips ourselves in the world-class clean room facility of DTU in Denmark.

Details

All Nano Channel Chips are in principle very similar, but the thickness of liquid and membranes vary, as well as the channel pattern which can be optimized for liquid-area in the field of view or specific flow and mixing capabilities.

If we do not have the chips you need in stock, we’ll make them for you!
Adjust SiN thickness down to 10 nm and liquid thickness down to 20 nm – and let us design a nano channel flow structure that suits your need for mixing, flow, or maybe just having a large viewing area.

TEM HOLDER WITH 4-INLET FLOW CONTROL

This 4-inlet flow control holder makes the best use possible of the Nano Channel Chip, which also has four inlets.

Details

Optional: Heating up to 150 C°
Recommended use with Fluigent pressure-based flow controller
Available for JEOL and Thermo Fisher TEMs
Possible to rent on a monthly basis!

The TEM flow holder has four inlet ports in the back which can be accessed to control flow and mixing during TEM experiments.Together with a Fluigent pressure-based flow control system, you can flow and mix to the full extent possible with the Nano Channel Chip.

Static TEM holder

This static holder is an extremely robust and easy-to-use TEM holder.It is the fastest and most reliable solution in the world when it comes to getting high-resolution imaging in liquid.Because there are no flow-tubes in this holder, it can be made much thinner and more narrow, to maximize alpha-tilting inside the TEM.

Details

Optional: Heating up to 150 C°
Available for JEOL and Thermo Fisher TEMs
Extra high tilting angles possible
Possible to rent on a monthly basis!

SEM/Optical Flow Holder

Over the last several years, we have been using our SEM / optical holder a lot more than our TEM holders! The reason is that it is very easy to use and enables us to “play” with our Nano Channel Chip until we find the correct procedure for preparing the sample and flow/mix it in the right way – before wasting precious and more demanding time on the TEM.

Details

Available in PEEK, Aluminium, Stainless Steel 316
Recommended use with Fluigent pressure-based flow controller
Excellent add-on for refining TEM experiments in optical before wasting precious TEM time
Easy to get started: Buy with credit card here

A lot of details can be observed in optical or SEM, and as long as atomic details are not required, it is an excellent way to start refining your experiment. And  a lot can actually be seen in optical. In dark-field optical microscope, it is possible to see particles down to 50 nm in size. And due to changes in the refractive index, it is possible to see if something precipitates in the nano channels. We therefore recommend starting with a SEM / optical holder or getting one as an add-on to your TEM holder, to save you precious time and make optimizing experimental setups a lot easier.

SEM/Optical static Holder

Compatibility with SEM: System can be taped to a SEM stage with carbon or cop-per tape.



전화문의
02-923-3881
상단으로