나노비즈코리아

본문 바로가기 주메뉴 바로가기 서브메뉴 바로가기

PRODUCTS

NanoBiz Korea

Autosamdri®-815, Series B
tousimis

The Supercritical Autosamdri®-815, Series B System was developed by Dr. A. J. Tousimis and our team of long-standing associates within the tousimis® SAMDRI design group.

Smooth operation and precise control are the Supercritical Autosamdri®-815's trademark; allowing anti-stiction processing of 10mm square die as well as 1" (25mm) wafers.

제품설명


⤓ Download Brochure (PDF)  

• Process up to 1" (25mm) wafers 

• Automatic Supercritical Point Dryer 

• Minimal Facility Utility Requirements 

• Made in U.S.A. 


tousimis catalog# 8779C 


FEATURES


Microprocessor* controller allows for complete automatic processing.


Electromagnetic valves and seals inert to LCO2, alcohols and acetone.


Internal surfaces inert to CO2, ultra pure alcohols and acetone.


Repeatable operating parameters insuring reproducibility of results.


Process up to 5 x 10mm square die or 5 x 1" (25mm) diameter wafers with every run! (Tousimis HF compatible Wafer/Die Holders* are used to transport and process your MEMS devices minimizing handling).


Integrated temperature controls.*


Internal rupture disc built in for safety.


LED's instantly indicate process mode at a glance.*


Clean room static-free compatible design.


Complete advanced solid state reliable electronics.


Efficient adiabatic cooling system*; cool Process Chamber from room temperature to operational temperature in less than 90 seconds!


All electronic components meet CE, UL and/or U.S. Military Specifications.


Static pressure control module pre-set for automatic safe pressure stability.


0.08µm internal filtration system delivers clean filtered LCO2 to process chamber. *


Under-lit chamber with viewing window facilitates operator chamber status viewing.


Vernier Handle Meter Valves allow for repeatable precision flow control.


SOTER™ Condenser* connects to Autosamdri®-815, Series B (SOTER™ Condenser quietly separates waste alcohol from exhaust CO2).


SPECIFICATIONS


Cabinet: 14.0" (35.6cm) Width x 10.25" (26.0cm) Height x 21.5" (54.6cm) Length


System Set-Up Area Required: 36" (92cm) Width x 30" (76cm) Depth


Chamber size: 1.25" I.D. x 1.25" Depth, Chamber volume: 25 ml


Temperature gauge range: -30°C to 60°C


Pressure gauge range: 0 to 2,000 psi


Purge Timer Range: 0 - 45 minutes


120V/50-60Hz (Other voltage units also available. Please Inquire)


STANDARD ACCESSORIES 


LCO2 High Pressure braided stainless steel inert Teflon® lined hose. 10ft (~3m) long for clean room operation (at a nominal charge, other lengths available upon request).


Double T-Filter Assembly (#8785) pre-installed onto the chamber LCO2 supply high-pressure hose. Flows LCO2 twice thru 0.5µm filters with 99.5% particulate retention prior to LCO2 entering Autosamdri®-815.


SOTER™ Condenser* connects to Autosamdri®-815, Series B. Captures all alcohol and deadens exhaust noise.


Static free Exhaust Tubing for all exhaust outlets.


Internal stainless and nickel scintered filtration systems incorporated to protect lines, wafers, and valves down to 0.08µm.


20 SCFH Flow Meter enables periodic BLEED rate measurement for exact pressure decompression.


Spare Chamber O-ring (2), Chamber Lamp (1), and 5A Slo-Blow Fuses (2).


10mm Square HF Compatible Chip Holder* included. This holder can load up to 5 die per process run.


Installation Tool Kit included.


Free lifetime technical support consultation by our scientific staff.


2 year warranty on all parts and labor.


OPTIONAL ACCESSORIES


8777: SOTER™ CONDENSER


8760-01: KNURL NUT for 1.25" Process Chamber


8760-40: 5 AMP FUSE for SAMDRI® Models: PVT-3D, 795, 815, 815B, 915B (Series A & Series B Only)


8770-10: CHAMBER LAMP, 120Volt/60Hz


8770-32: HIGH-PRESSURE HOSE, 5ft


8770-33: HIGH-PRESSURE HOSE, 10ft


8770-50: CHAMBER LID, for any tousimis SAMDRI® with a 1.25" diameter chambers


8785: Double T-Filter Assembly


8770-83B: 0.5µm Stainless Steel Particulate Filter Element for LCO2 T-Filter or External Purge Line Filter.


8784-05: Gasket for LCO2 Tank Connect


8770-51/T: Teflon® O-Ring for 1.25" Chamber I.D.


8770-45: Flow Meter - Use with any 1.25" dia. Samdri® Chamber (20 SCFH)


8770-53: POWER CABLE


8770-54: LCO2 TANK SCALE W/ REMOTE DISPLAY


8770-56: Step-Down Transformer, 200-240V → 110-120V, 1000W


8770-83A: Internal 0.5µm 316SS Particulate Line Filter


8768G: 1" - 25mm HF Compatible Wafer Holder Holds 5 Wafers


8768E: 10mm Square HF Compatible Chip Holder, Holds 5 Die


CPD MULTI-APPLICATIONS 
Gel
MEMS

Tousimis CPD : Critical Point Dryer Can be drying a sample without damage through the patented stasis mode.

 


전화문의
02-923-3881
상단으로