Filters are available for the removal of oil mist from vacuum pump exhaust gases. The units are disposable and must be fitted vertically. Each unit consists of a microfibre element permanently sealed.
AGG3623 has a nylon housing measuring 73(H) x 51mm dia, with 1/2" NPT male fitting and is suitable for a flow rate up to 5m3/hour (83 I/min).
AGG3624 has a steel housing with 1/3" NPT fitting suitable for a flow rate up to 15m3/hour(250 I/min).
The fixing thread on the oil mist filter may not be compatible with the threaded exhaust outlet on the rotary pump. In such cases an adaptor will be required and the two most commonly used adaptors are listed below.