PRODUCTS
NanoBiz Korea
나노비즈코리아
VPI Coater
Thermal Evaporation Carbon Coater (SD800C Model)
SD800C 모델 탄소 코팅기는 시료 표면에 얇은 전도성 탄소 필름을 도포합니다. 비전도성 샘플에 이 코팅을 적용하는 것은 SEM에서 분석을 위한 전하 전자 아티팩트를 줄이기 위한 효과적인 준비 기술입니다
제품설명
Thermal Evaporation Carbon Coater (SD800C Model)
Introduction
Thermal Evaporation Carbon Coater (SD800C Model) is ideal and designed for lab SEM sample preparation.
SD800C Model carbon coater applies a thin conductive carbon film on a sample surface.
Applying this coating to a non-conductive sample is an effective preparation technique for diminishing charge-up electron artifacts for analysis in a SEM.
Working vacuum pressure can be achieved quickly when using proper vacuum pump within 5 minutes. It is user friendly and easy to operate.
Vacuum pump is included.
Technical Specification
| Vacuum pump set | (Oil required) rotary vacuum pump |
| Rotary pumping speed | 50 Hz : 8 m³/h (2.2 L/s)/ 60 Hz : 9.6m³/h 2.6 L/s) |
| Vacuum limit | 2Pa |
| Max evaporation current | 100A |
| Working pressure | 6Pa -4 Pa |
| Vacuuming tme | < 5 Min( 2Pa) |
| Vacuum measure | Measuring range from atmosphere to 2*10-2mbar |
| Chamber size | Φ150*120mm (height) scratch resistant quartz glass |
| Evaporation target source | Target material :carbon rope/target source:carbon rope |
| Operation method | Instruction Manua |
| Weight/size | 45kg/340mm length x 390mm wide x 300mm high |
| Power supply | AC 110V 60Hz or AC 220V 50Hz |
| Power consumption | <2000W |
| Warranty | One year limited warranty with lifetime product support |
