PRODUCTS
NanoBiz Korea
- > Compact, lightweight tabletop size with small footprint.
- > Precise flow control for INLET, COOL, PURGE, VENT, and BLEED micro metering valves.
- > Vernier handles on all metering valves allow for reproducible settings.
- > Internal surfaces inert to LCO2 and ultra-pure alcohols.
- > Integrated automatic temperature control.
- > Static pressure control module for automatic pressure stability.
- > EZ top loading process chamber.
- > Internal filtration* protect samples and valves down to 0.5µm.
- > Tough, solvent resistant cabinet.
- > Under-lit chamber with viewing port aids visualization of chamber status.
- > Fast adiabatic chamber cooling* with CO2.
- > Advanced solid state reliable electronics.
- > All electronic and other components meet UL, CE and/or U.S. Military Specifications.
- > Optional SOTER™ Condenser* may be attached to capture waste alcohol and deaden PURGE exhaust noise.
Specifications
- > Cabinet: 12.75"(W)x 9.75"(H) x 18.50"(L) [32.4cm(W) x 24.8cm(H) x 47.0cm(L)]
- > System Set-Up Area Required: 20"(W) x 30"(D) [51cm(W) x 76cm(D)]
- > Chamber size: 1.25" I.D. x 1.25" Depth
- > Temperature gauge range: -30°C to 60°C, Pressure gauge range: 0 to 2,000 psi.
- > 120V / 50-60Hz (Other voltage units also available: Please inquire)
Standard Accessories
- > Flexible High-Pressure braided stainless steel inert Teflon® lined LCO2 Supply Hose, 5ft (approximate 1.5m) long.
- > LCO2 Filter Assembly (#8784) removes water/oil and particulates down to 0.5µm. Filter is conveniently pre-installed onto the LCO2 High Pressure Hose.
- > Static free exhaust tubing for the PURGE/VENT/BLEED and COOL exhaust outlets.
- > Flow Meter supplied allows precise periodic BLEED exhaust rate flow control.
- > Spare chamber O-ring (2), chamber lamp (1), and 5A slo-blow fuses (2).
- > User Manual and Check-Out data sheet.
- > Free lifetime technical support.
- > 2 year warranty on all parts and labor.
Optional Accessories
- > 8777: :SOTER™ CONDENSER
- > 8760-01: :KNURL NUT for 1.25" Process Chamber
- > 8760-40: :5 AMP FUSE for SAMDRI® Models: PVT-3D, 795, 815, 815B, 915B (Series A & Series B Only)
- > 8770-10: :CHAMBER LAMP, 120Volt/60Hz
- > 8770-32: :HIGH-PRESSURE HOSE, 5ft
- > 8770-33: :HIGH-PRESSURE HOSE, 10ft
- > 8770-50: :CHAMBER LID, for any tousimis SAMDRI® with a 1.25" diameter chambers
- > 8784: :LCO2 Filter Assembly
- > 8784A: :LCO2 FILTER ELEMENT for #8784
- > 8770-83B: :0.5µm Stainless Steel Particulate Filter Element for LCO2 T-Filter or External Purge Line Filter.
- > 8784B: :O-Ring for # 8784 LCO2 Filter Assembly Seal
- > 8784-05: :Gasket for LCO2 Tank Connect
- > 8770-51: :O-Ring for 1.25" Chamber I.D.
- > 8770-45: :Flow Meter - Use with any 1.25" dia. Samdri® Chamber (20 SCFH)
- > 8770-53: :POWER CABLE
- > 8770-54: :LCO2 TANK SCALE W/ REMOTE DISPLAY
- > 8770-56: :Step-Down Transformer, 200-240V → 110-120V, 1000W
- > 8770-83: :Internal 0.5 µm Brass Particulate Line Filter
- > 8761: :GRID HOLDER, Holds 12 grids
- > 8762: :SAMPLE HOLDER, FOR 12 SAMPLES
- > 8763: :SAMPLE HOLDER, FOR 24 SAMPLES
- > 8764: :SAMPLE HOLDER, FOR 4 SAMPLES
- > 8766: :COVER SLIP HOLDER, for 9mm to 13mm Diameter Glass Cover Slips
- > 8766-01: :SPARE WASHERS FOR COVER SLIP HOLDER, for use with #8766
- > 8766-02: :STAINLESS STEEL SCREENS FOR COVER SLIP HOLDER, for use with #8766
- > 8767: :COVER SLIP HOLDER, for 16mm to 22mm Diameter Glass Cover Slips
- > 8767-01: :SPARE WASHERS FOR COVER SLIP HOLDER, for use with #8767
- > 8767-02: :STAINLESS STEEL SCREENS FOR COVER SLIP HOLDER, for use with #8767
Tousimis CPD : Critical Point Dryer
Can be drying a sample without damage through the patented stasis mode.
